Airport Plaza Hotel consisted of 4 buildings total, three 2-story buildings and 1 tower. Approximately 419 field squares. The scope of this project was to rehabilitate the existing aged roof by installing the Neptune rubber coating to achieve manufacturer’s 20-year material and labor warranty.

Delineators were set up at each rooftop here. There were specific controlled access zones allocated to get to the various rooftop areas and set up was OSHA compliant. Staging areas were minimal so as not to interfere with the hotel guests and operations. Each area had to be mobilized and demobilized daily.

The project had irregular surfaces, severe ponding and a lot of equipment that was stored on the tower roof that needed to be raised. Also, with the location near the airport, airport security clearance and protocols had to be met and adhered to. Mansards around the edge of the hotel also were changed out with the drip edge flashing that was rotting around the outside.

Strategic methods were utilized to apply the system in order to keep the overspray contained. With only 2 stories away from the guests, cars and the pool area, the crew had to be very cautious and systematic with the application.

This product is unique in that it dries within seconds of application. This project was a perfect candidate for this Neptune product with the irregular surfaces and severe ponding issues as well as the multiple penetrations that needed to be sealed up with all the rooftop equipment.

The two lower roofs were also installed with PV with the standoff legs sealed and installed the crew as well. This project was a turnkey roofing and PV project.